Too much to read

‍

• Physiological fitness can improve fast, but tissues adapt slowly — mechanical load often lags behind.
• Heart rate or lactate thresholds don’t always match mechanical tipping points, creating hidden overload.

OnTracx measures mechanical load and identifies individual breakpoints, turning invisible load into actionable insights. This allows runners and experts to align training with both physiological and mechanical readiness for safer, smarter progression.

The Body Adapts at Different Speeds

Runners are driven by progress like longer distances, faster splits, stronger results. But that same drive often leads to a familiar cycle: injury, rehab, recovery… and relapse.

‍

The challenge isn’t motivation — it’s that physiological adaptations happen much faster than mechanical adaptations (Kjaer et al., 2009; Harrington et al., 2019; Wearing et al., 2006). Cardiovascular and metabolic adaptations occur within weeks, while tendon and bone adaptation occurs over months (Wearing et al., 2006). Your cardiovascular system or muscles might feel ready for a new pace or volume, but your tendons, bones, and joints often lag behind. That’s why, especially after injury or during a renewed start, mechanical load should guide the progression first, and later on the real art is balancing both mechanical and physiological load.

‍

Knowing vs understanding

‍

We all know the classic advice: build up gradually, don’t do too much too soon, listen to your body.

But in practice, that guidance rarely answers the real questions runners face. What is too much for me? Can I handle another session? Why did I feel great during the run but sore or uncomfortable two days later?

To truly grasp how training choices impact load and injury risk, runners need tangible feedback, and experts need the ability to interpret it. Only then can physiological readiness and mechanical tolerance be aligned safely and progression finally becomes something you can trust rather than guess.

‍

Mechanical load: the invisible driver of injury risk

‍

Mechanical load is far more than “mileage” or “time on your feet.” It’s influenced by many factors: speed and cadence, foot strike pattern, terrain and slope, fatigue, footwear and more (Kyrolainen et al., 2001; Heiderscheit et al., 2011; Daoud et al., 2012; Giandolini et al., 2016; Christina et al., 2001; Bonacci et al., 2013).

Because of these variables, generic rules like the “10% increase in distance per week” often don’t work injury preventive (Buist et al., 2010). They don’t account for how forces per step change with different running conditions. Studies show that mechanical load for the same runner can vary by 20–30% depending on these factors (Nielsen et al., 2014). Between runners, the variability is even larger.

Physiological load is more tangible: you feel out of breath or you feel relaxed. Mechanical load is slower to manifest: discomfort or pain usually appears after the session, often 24–72 hours later (Bertelsen et al., 2017). One run may trigger symptoms, but the cause usually lies weeks earlier in unnoticed load spikes. A runner may feel fit physiologically while their tissues are quietly accumulating mechanical stress beyond

their limits.

‍

‍

‍

‍

‍

‍

‍

Thresholds and tipping points: hidden risks

‍

Physiological parameters such as lactate threshold, heart-rate zones and VO₂max  are widely known and routinely used to guide training. Mechanical load and its individual variability, however, is less understood: rarely talked about, poorly understood, and almost never considered in coaching or rehabilitation practice.

Runners respond differently to speed. Some show linear load responses to speed: as speed rises, load increases gradually. Others hit breakpoints, where a small increase in speed triggers exponential spikes in load, much like the sharp rise seen near the anaerobic or lactate threshold (internal link to blog speed-load). However, both do not necessarily align.

When the thresholds align

‍

If the physiological tipping point matches the biomechanical breakpoint, mechanical and physiological load stay stable up to a certain pace. Once that pace is exceeded, both mechanical and physiological load escalate rapidly. However, This means that speeds at or above this breakpoint cause cumulative load to rise much more quickly, allowing a runner to reach their maximal safe load target faster. To ensure adaptations occur safely in both physiological and mechanical systems, speeds above the mechanical breakpoint should be introduced gradually, for example through controlled intervals, so that tissues and cardiovascular/metabolic systems can adapt within their respective limits.

‍

‍

When physiological and mechanical thresholds don’t match

‍

If the physiological threshold doesn’t match the mechanical one or if the runner has a linear load response, silent overloading becomes likely. The runner feels fine physiologically at a certain speed, but mechanical load is spiking beyond tissue tolerance. Without awareness of their biomechanical profile, this scenario commonly drives overuse injuries, even when training feels “easy.”

This is why runners may feel “ready” while their tissues are far from it. Understanding both systems is essential to prevent relapse and optimize progress.

‍

‍

Bridging the gap with measurement and feedback

‍

This is where OnTracx changes the game. It brings mechanical load measurement to running, the way lactate meters once revolutionized physiological measurement into endurance sports.

A traditional performance test shows how your heart and metabolic system respond as speed increases. An OnTracx screening does the same for your tissues — revealing how your tendons, bones, and joints respond step by step. Instead of heart rate or lactate, a foot-mounted sensor captures the mechanical load you experience with every stride.

The concept is intuitive: just as a performance test defines heart-rate zones and physiological thresholds, an OnTracx screening exposes how mechanical load rises with speed and where your personal breakpoint sits. Both methods guide training — one managing intensity, the other safeguarding progression.

But overuse injuries are driven not by a single hard session but by the balance between load tolerance and how cumulative load builds over time. That’s why OnTracx doesn’t stop at screening: experts can use OnTracx Pro to generate individualized load-based training programs and monitor mechanical load during everyday training, ensuring your progression stays within what your tissues can actually handle.

Runners finally understand not just that they should progress gradually, but how much, how fast, and at which speeds mechanical risk begins to rise.

Rehab becomes a science-driven, individualized progression, replacing guesswork with precision. This turns gradual progression from a vague recommendation into a precise, tailored process.

‍

Take-home message

‍

• Physiological systems adapt quickly; mechanical tissues adapt slowly.
• Mechanical load is invisible without measurement and influenced by speed, terrain, technique, and more.
• Runners can feel ready while tissues accumulate silent risk — linear or exponential load responses determine how much. Often mechanical breakpoints often don’t align with physiological ones.
• Measuring load allows runners and professionals to understand and act, creating individualized, load-based training programs.

Feeling fitter isn’t the same as being mechanically ready — but with tangible feedback, clear thresholds, and a strong runner–expert partnership, progress and safety can coexist.